Markets/Application
Recommended for drives where single belts vibrate, turn over or jump off the drive.
Product Description :
1,Double fabric cover offers extreme abrasion and wear resistance.
2,Chloroprene rubber compounds provide super oil and heat resistance.
3,Construction design confirm stable power transmission for long distance.
4,At least 40% higher power ratings than standard V belts.
5,Better resistance to vibrations, Less maintenance, less downtime.
6,Temperature resistance : -30°C - +100°C, limited oil resistance, antistatic.
7,The banded construction allows multiple belts to function as a single unit, with even load distribution and each sheave groove.
Type | Top Width | Pitch Width | Height |
Wedge Angle |
Conversion Table |
Length Standard |
Max Banded | Weight/m | Spec sheet |
---|---|---|---|---|---|---|---|---|---|
mm | mm | mm | pcs | kgs | |||||
RSPZ | 9.7 | 12 | 11 | 40 | Lw=Li+37 | Lw | 32 | 0.13 | details |
RSPA | 12.7 | 15 | 13 | 40 | Lw=Li+45 | Lw | 0.18 | ||
RPSB | 16.5 | 19.05 | 16.5 | 40 | Lw=Li+60 | Lw | 25 | 0.28 | |
RSPC | 22 | 25.5 | 22 | 40 | Lw=Li+83 | Lw | 21 | 0.58 |
Structure | Function | Material |
---|---|---|
1.Cover fabric | Protects the inner parts of the belt and strong abrasion on the pulley groove | Cotton fabric, Polyester, Cotton synthetic fabric |
2.Tension member | Primary material for transferring power | Polyester with specially treated |
3.Top compression rubber | Maintains belt shape (upper) | NR, CR,SBR |
4.Adhesive rubber | Supports and protects tension member adhesion | NR, CR,SBR |
5.Bottom compression rubber | Maintains belt shape (lower) | NR, CR,SBR |