1.Drives to beaters on conventional blow rooms.
crossed flat-drive belt transmits drives from cylinder to flat on old cards.

2.Drives in high production cards such as the drive from motor to lickerin and cylinder; drive to cleaner roller at the delivery side; drive from motor to flat-stripper roller and crossed-flat-drive belt from cylinder to a pulley from where further drive proceeds through double stage speed reduction using worm and worm gears and a mechanical clutch to the driving-shaft of flat.

3.Drive belt to drafting rollers and other rolling elements on a single delivery drawing machine.

4.Drives to opening rollers, friction drums and take-off rollers on friction spinning machine.

5.Drive belt to rotor on rotor-spinning machine.

6.Main drive belt on draw-texturing machine.

7.Drive belt to creel-rollers of a high speed drawing machine.

This article comes from quora edit released