What Is a Drive Belt?

What Is a Drive Belt? Here’s What You Need to Know

There are three types of drive belts:

1. Serpentine Belt

A serpentine belt is located under the hood of a car, and it “snakes” its way between various pulleys and accessories. This type of drive belt is usually found in cars produced after 1990. It also tends to last longer than other types of drive belts, is simple to install and remove, and transmits power between a car’s air conditioner compressor, water pump, alternator, and steering pump.

2. V-Belt

A V-belt runs off a crank and pulley and typically travels between one or two engine accessories. Older cars often have several V-belts used for power steering, air conditioning, and other operating essentials. V-belts can be more difficult to change than serpentine belts. Additionally, if V-belts become loose, they can cause your alternator to malfunction and lead your engine to overheat.

3. Timing Belt

A timing belt links your car engine’s crankshaft to its camshaft; the crankshaft helps the engine’s pistons rotate, while the camshaft helps open and close engine valves. It can be tough to see the timing belt due to the fact that it is likely hidden underneath a timing cover. However, the timing belt should not be ignored; otherwise, if the timing belt wears down and malfunctions, it may result in a costly, time-intensive engine rebuild.

How Often Should You Change the Belts in Your Car?

It is often beneficial to change the drive belts in your car approximately every 60,000 to 100,000 miles. By undergoing annual car inspections, you can have your drive belts evaluated. If any signs of damage or severe wear and tear are identified, the belts can be replaced.

This article comes from fixauto edit released